User`s manual

User manual Version 1.3

SW5002 Wireless Serial Server

- 70 -

Appendix C. Upgrading System Software

Updated version of firmware can be downloaded from www.atop.com.tw.

C.1. System Upgrading Procedures

Follow the upgrading procedures below for the latest firmware.

 Make sure the PC and SW5002 on the same network. Use command “ping” or “SerialManager”

utility program to verify their availability

 Edit “dll.bat ” to fit the system requirements, Be sure to save all modifications

 Run dll.bat ,or type command and parameters by linux_dl_v2.exe, the following screen shall

appear:

linux_dl_v2.exe zImage.bin 10.0.152.100 (device’s IP is 10.0.152.100)

 Tips : “linux_dl_v2.exe” is the upgraded executing file(can find on setup cd) and zImage.bin is the

name of the firmware file; xxx.xxx.xxx.xxx is the IP address of SW5002.

Fig 81. Start firmware upgrade perceudre for SW5002

SW5002 shall automatically perform the download at first phase, and restart after downloaded

process at secondary phase

Fig 82. Connected & downloading process for SW5002’s Upgrade