User`s manual

User manual Version 1.3
SW5002 Wireless Serial Server
Copyright © 2010 Atop Technologies, Inc.
All rights reserved. Designed in Taiwan
- 37 -
6.3.1. Wireless IP, Netmask, Gateway and IP mode Settings
Operation: [Main] Æ [3 Wireless Settings]Æ [1 IP]/[2 Netmask]/ [3 Gateway]/[4 IP Mode]
User can configure SW5002 Wireless IP/Netmask/Gateway by enter 1/2/3 at Wireless Settings page and
enter the desired IP/Netmask/Gateway address.
User can also configure wireless IP mode by enter 4 at Wireless Settings page and enter 1 for static IP
address or enter 2 for DHCP mode (Fig. 47).
Fig 46. Configure Wireless Networking by Telnet
Fig 47. Configure Wireless IP mode by Telnet
6.3.2. Configure Region
Operation: [Main] Æ [3 Wireless Setting] Æ [5 Region]
WLAN Region is the geography area that user want to implement the SW5002. Because the wireless
channel implement the frequency band differently in a different regions. User can configure the WLAN
Region by enter 5 at Wireless Settings page and enter the menu according to user’s region.