User`s manual

User manual Version 1.3
SW5002 Wireless Serial Server
Copyright © 2010 Atop Technologies, Inc.
All rights reserved. Designed in Taiwan
- 33 -
6.1. General Information
Operation: [Main]Æ[1 Overview]
Select “1” from “Input choice (0~6) and enter:” to enter “overview page.
This system overview window gives the general information on Ethernet & WLAN IP, MAC address,
SNMP information, kernel and AP version, and the connection status of the SW5002 (Fig. 39).
The following overview information shall appear.
Device Information:
Model Name: SW5002’s Model
Device Name: [Allows for changes in SNMP settings]
Kernel Version: [Read Only, Generated by system]
AP Version: [Read Only, Generated by system]
Ethernet Information:
MAC: [Read Only]
IP: [Allows for changes in Network Page]
WLAN Information:
MAC: [Read Only]
IP: [Allows for changes in Auto IP of Network Page]
Connected: [SSID name, if Wireless SW5002 is connected]
Fig 40. System Information from Overview
DNS Information:
DNS1: [IP address of 1
st
DNS Server, Allows for changes in Auto IP of Networking Page]
DNS2: [IP address of 2
nd
DNS Server, Allows for changes in Auto IP of Networking Page]