User`s manual

User manual Version 1.3
SW5002 Wireless Serial Server
Copyright © 2010 Atop Technologies, Inc.
All rights reserved. Designed in Taiwan
- 32 -
6. Telnet Configuration
User can also use Telnet utility to change SW5002 configuration settings.
Open Ms-DOS command prompt window or other telnet tools
Enter the “IP address” of the SW5002 (For example, Telnet 10.0.50.100). The system then
prompts for username and password, the default username is “admin” and the default password
is null (blank).
Fig 38. Login into System by Telnet
Then the following main menu shall appear
Fig 39. Overview information by telnet
If the SW5002 does not receive any command within 1 minute, Telnet will be terminated
automatically.
The changes of networking parameters will take effect only after the SW5002 is restarted.