User`s manual

User manual Version 1.3
SW5002 Wireless Serial Server
Copyright © 2010 Atop Technologies, Inc.
All rights reserved. Designed in Taiwan
- 24 -
“0.0.0.0”.
User can configure one or group IP for source IP. If IP filter is enabled, only source IP assigned can be
connected to SW5001.
Fig 28. TCP Server in Link mode
 Note: Enable Virtual COM mode if the remote site PC’s “Serial to IP” tool is installed
5.5.3. TCP Client Mode
User may enter destination IP & port (default: 4660) to establish connection of counter-pair (remote) host
(For example, another SW5002, or PC for data-collection). SW5002 can support two destination hosts
simultaneously.
Fig 29. TCP Client in Link mode