User`s manual

User manual Version 1.3
SW5002 Wireless Serial Server
Copyright © 2010 Atop Technologies, Inc.
All rights reserved. Designed in Taiwan
- 19 -
Fig 22. Wireless information by Web page
There are 3 buttons can be operated on Wireless page
 Rescan: Click on the “Rescan” button, and SW5002 will start site-survey procedures, then on the
site-survey list will display the access points founded.
 Select: On the site-survey list, click on radio button to attach the access point you wanted
 User defined: Users can also define information for wireless parameters by themselves.
5.4.1. Wireless Detail Settings
User can configure wireless LAN parameters through web pages. Pop-up windows page will be shown for
advanced wireless settings if “select” or “user define” button was clicked (FIG. 23). For example, User can
configure SSID, wireless topology, Wireless Band Mode, TxRate, Channel, Authentication, and
Encryption of the access point that SW5002 want to connect to.
The advanced wireless settings also include roaming threshold. User can configure roaming signal
threshold for the SW5002. SW5002 will change to the stronger wireless signal access point, if the original
access point’s signal is less than roaming threshold.