Installation guide

Sms4Domino Help
- 70 -
Test Gateway documents
Test Gateway documentsTest Gateway documents
Test Gateway documents
A Test Gateway provides a low cost way for evaluating the software without incurring a cost from the
phone company. Outbound test gateways pretend to send a Sms and may generate a transmission
failure from time to time. Inbound test gateways pretend to receive a Sms message from time to
time.
In production environments test gateways will not be used.
Specific settings for Test Gateway
Directions: specify if the modem is used for sending SMS messages (outbound) and/or

receiving SMS messages (inbound)
Polling cycle: a thread polls an internal queue for new outbound SMS requests every x

milliseconds.
Receive cycle: only used fro inbound gateways. One virtual inbound SMS message is

received per receive cycle.
Fail cycle: If set to N then every Nth sent or received SMS message will throw an error or

flag the outbound message as not sent. Set to zero to disable failures. Integer value.
Outbound fail method: flag as unsent or throw an error.

Outbound duration: Simulated duration for sending one SMS message. The actual

duration will be a random time between the two specified values.