ABLELink® SE5001 Ethernet Serial Server Quick Start Guide Version 1.3 Updated on 2007/05/24 Tel: 886-3-5508137 Fax: 886-3-5508131 http://www.atop.com.
Quick Start Guide Version 1.3 SE5001 Ethernet Serial Server 刪除: 1 This document is intended to provide customers with brief descriptions on the product and to assist customers to get started. For detail information and operations of the product, please refer to the user’s manual in the product CD. 1.
Quick Start Guide Version 1.3 SE5001 Ethernet Serial Server 刪除: 1 LED Indicators: LAN LED Message Description Off Ethernet Disconnected Blinking with Green Data is transmitting on Ethernet for 100Mbps Blinking with Orange Data is transmitting on Ethernet for 10Mbps Table 1. LAN LED Message COM Port LED Message Description Off No data is transmitting on COM port Blinking Data is transmitting on COM port Table 2.
Quick Start Guide Version 1.3 SE5001 Ethernet Serial Server 刪除: 1 Figure 3.1. monitor.exe utility Dialog Window Assign a Static IP address by: A. Using Telnet 1. Telnet to SE5001 using DOS command “Telnet IP_address”. Example: telnet 10.0.50.100 2. SE5001’s network, link mode and COM ports settings can be configured in the telnet window B. Using Monitor.exe Utility Use Monitor.exe which comes inside the Product CD to automatically search for all SE5001 connected to ones local area network.
