User`s manual

User Manual Version 1.4
SE5001 Ethernet Serial Server
Copyright © 2006 Atop Technologies, Inc.
All rights reserved. Designed in Taiwan.
47
Appendix B: Upgrade System Firmware
After the new version of firmware is released, customers can download it from www.Atop.com.tw After one
download the firmware, please follow these instructions listed below.
B.1 Upgrade Procedures
When one get a new software version, please follow the sequences below to upgrade ones SE5001.
1. Connect a PC (Windows 95/98/NT/2000/XP) and SE5001 one wish to upgrade the firmware in the
same TCP/IP network. Use command ping or SerialManager program to verify their availability.
2. Prepare the download tool and press any key to edit its configuration file dapdl.cfg. dapdl.cfg file
can be found in the product CD.
3 Edit the "dapdl.cfg" file to fit ones system need, the content of the file looks like as the following.
Be sure to save ones modifications after the change is made.
Remote_IP 10.0.50.100
Load U5001ap.hex
The first line identifies the IP address of SE5001, the second line identifies the firmware (.Hex file) name to
be downloaded.
4 Execute the utility program download.bat, it can be found in the product CD.
5 Input the user name and password credential, the new firmware will be downloaded.
6 SE5001 will automatically restart each time the firmware is successfully downloaded.