User`s manual

User Manual Version 1.4
SE5001 Ethernet Serial Server
Copyright © 2006 Atop Technologies, Inc.
All rights reserved. Designed in Taiwan.
35
4. For Server Credentials, the default is No Login Required. If ones serial server does require a
login by the Virtual COM Redirector, the Virtual COM Redirector needs to provide a username
and/or password every time an application tries to use the serial server.
5. Click the Configuration Wizard button and then click the Start button that appears in the wizard
window. This important step verifies that the Virtual COM Redirector can communicate with the
serial server using the settings one have provided. If the Log display does not show errors, click the
Use Settings button in the wizard, which makes the recommended settings effective and returns
one to the Control Panel to continue with the following steps.( Figure 4.5)
6.
Figure 4.5 Configuration Wizard
7. For Connection Protocol, the setting must match the TCP/IP protocol that the serial server
supports. The Configuration Wizard is usually able to determine the correct setting.
8. For COM Port Options, the settings must match the COM port behavior expected by the PC
application that will use this COM port. The Configuration Wizard will recommend a combination
of settings.