User`s manual

User Manual Version 1.4

SE5001 Ethernet Serial Server

3.3.6 Pair Connection

In the case of the serial connection is established with two or more SE5001 to send data over Ethernet

network, i.e. pair connection mode, one can choose “pair connection” which is indicated in the following

figure to cope with any type of serial device. (Figure 3.23)

Figure 3.23 Com1 setup –pair connection

Configure SE5001 as UDP mode. Local port is 4660, destination IP is 10.0.29.254 and destination port is

4660.( Figure 3.24)

Figure 3.24 Com 1 setup –UDP mode

1. Click on “Save Configuration” to save the changes.

2. If the update is successful, the following screen appears.( Figure 3.25)