User`s manual

User Manual Version 1.4

SE5001 Ethernet Serial Server

Note:

1. If SE5001 does not receive any command within 1 minute, Telnet will be terminated automatically.

2. The changes of networking parameters will take effect only when one exit and restart SE5001.

->Select “1” from “Input choice and enter (0~4):” to enter overview page as following:( Figure 3.6)

Figure 3.6 Overview

This page gives one the general information of SE5001 including IP and MAC address, SNMP

information, kernel and AP version, and connection status of the device.