User`s manual

User manual Version 1.1
ABLELink
®
Ethernet Serial Server SE5002
Copyright © 2006 Atop Technologies, Inc.
All rights reserved. Designed in Taiwan.
- 35 -
Status Descriptions
S
The system is configured as a TCP Server and Listing.
A
The TCP Server is connected.
C
The system is configured as a TCP Client and not yet connected.
C
The system is configured as a TCP Client and trying to Connect.
B
The TCP Client is connected.
U
The system is configured as an UDP Mode.
For example, ‘S’ means that COM1 is in server mode and is not connected.
7.3 Using TCPTEST.EXE or TCPTEST2.EXE Sample Program
Sample programs TCPTEST.EXE and TCPTEST2.EXE can be used to check the status of SE5002. Refer to
chapter 6.2 for running the sample programs.
APPENDIX A: SPECIFICATION
A.1. Hardware Specification
Specifications
CPU
 16-bit Embedded CPU
 100MHz
Flash Memory
 512K Bytes
SDRAM
 512K Bytes
EEPROM
 512 Bytes
Host Communication
 IEEE802.3 base band
 TCP/IP, UDP, SNMP, HTTP, Telnet, ARP, BOOTP, DHCP, ICMP
Reset
 Built-in default key to restore factory default settings
Watch Dog Timer
 Software watch dog to auto reset
Serial Port
Communication
 Two RS-232 or RS-485/RS-422 selectable
 RS-232: EIA-RS-232C standard, Full Duplex, DB9
 RS-485: 2/4 wires, Half/Full duplex, Terminal Block
 RS-422: 4 wires, Half/Full duplex, Terminal Block
 Parameters
1) Baud-rate: 1200 bps ~ 230400 bps
2) Parity: None, Even, Odd, Mark, Space
3) Data bits: 7,8