User`s manual

User manual Version 1.1

ABLELink

Ethernet Serial Server SE5002

- 34 -

TCPTEST2 IP_Address Port_Number

The command tcptest2 10.0.50.100 4660 connects a TCP server of IP address 10.0.50.100 to port number

4660. The received data is displayed on the screen and the input data is sent to the TCP server. Binary data

in hex format with a leading character “\” can also be sent. For example, “\00” and “\FF” represent ASCII

code 0 and 255, respectively.

A modem can also be used to connect to the serial server. Command "AT\Od" sends standard AT command

to the modem which in return responds with "OK\0D\0A" message to the host application.

Always use '=' then Enter key to exit the program.

7 DIAGNOSTICS

There are several ways to check the status and availability of SE5002.

7.1 Using Standard TCP/IP Utility ping Command

Go to Windows Start menu, select Run and Enter in “ping <TCP Server IP address>”.

If the connection is established, the Reply messages are displayed; otherwise it will indicate Request timed

out.

7.2 Using monitor.exe Configuration Utility Program

Use monitor.exe configuration program on the product CD to check the status of SE5002. The status can be

read from “AP version” column of the tool.