User`s manual

User manual Version 1.1

ABLELink

Ethernet Serial Server SE5002

- 13 -

and AP version, and the connection status of the device.

Select “2” on “Input choice and enter (0~5):” to enter Networking window (Fig. 12).

Fig. 12. Network configuring using Telnet

This screen allows for changes in IP address, subnet mask, gateway IP address and SNMP information.

Please note that setting changes will not take effect until the device is restarted.

Note: Press “ESC” key to return to the previous menu .

1. Select “3” on “Input choice and enter (0~5):” (Fig. 13).

Fig. 13. changing password using Telnet

2. Enter the old password on “Please input old password”. Enter in the new password on “Please input

new password” , and again on “Please verify new password” fields.