User`s manual

User manual Version 1.1

ABLELink

Ethernet Serial Server SE5002

- 12 -

for a password, the default password is Null (Leave it blank). (Fig. 9)

Fig. 9. Telnet to the system

Note: One may press the reset button to reset the password..

1 Then the following main menu shall appear (Fig. 10)

Fig. 10. System main menu

Notes:

1. If the SE5002 does not receive any command within 1 minute, Telnet will be terminated automatically.

2. The changes of networking parameters will take effect only after the SE 5002 is exited and restarted.

->Select “1” from “Input choice and enter (0~5):” to enter “overview” .:(Fig. 11)

Fig. 11. System configuring using Telnet

This system overview window gives the general information on IP, MAC address, SNMP information, kernel