User`s manual

User manual Version 1.0
ABLELink
SW5001 Wireless Serial Server
54
Configuration Utility
The configuration utility is the main utility program used to display and to configure SW’s settings.
D.5 Run the utility
Start the program under environment and the following window shall appear.
D.6 Detecting Operational Devices
Follow steps below to detect all devices currently available on the network.
1. Start monitorXX.exe utility program.
2. Select an item from the Broadcast IP list.
3. Specify a number on Wishes box.
4. Click on the Invite button. This will display all the devices requested.
D.7 Configuring Devices
Use monitor.exe to configure the settings of devices on the network. To do so, please follow the steps
below.
1. Repeat the steps in D.2 to bring up devices information.
2. Select the device to be configured from IP Address, Click on the “Config” button, a configuration
dialog box will popup as shown in Figure D2: