User`s manual

User manual Version 1.0

ABLELink

SW5001 Wireless Serial Server

Appendix C: Upgrading System Software

Updated version of firmware can be downloaded from www.atop.com.tw.

C.1 System Upgrading Procedures

Follow the upgrading procedures below for the latest firmware:

1. Make sure the PC and SW on the same network. Use command “ping” or “monitor.exe” utility

program to verify their availability

2. Edit “dll.bat ” to fit the system requirements, Be sure to save all modifications

3. Run dll.bat ,or type command and parameters by linux_dl_v2.exe, the following screen shall appear:

linux_dl_v2.exe zImage.bin 10.0.152.100 (device’s IP is 10.0.152.100)

Tips : “linux_dl_v2.exe” is the upgraded executing file and zImage.bin is the name of the

firmware file; xxx.xxx.xxx.xxx is the IP address of SW

Fig. 69. Start firmware upgrade perceudre for SW

4. SW shall automatically perform the download at first phase, and restart after downloaded process at

secondary phase

Fig. 70. Connected & downloading process for SW’s Upgrade