User`s manual

User manual Version 1.0
ABLELink
SW5001 Wireless Serial Server
45
by the Virtual COM Redirector, the Virtual COM Redirector must provide a username and/or
password every time an application tries to access the serial server.
5. Click the Configuration Wizard button and then click the Start button that shall appear on the
wizard window. This step verifies that the Virtual COM Redirector communicates with the serial
server. If Log display does not show errors, click Use Settings, return to the Control Panel
6. Settings on the Connection Protocol must match the TCP/IP protocol supported by the serial
server. The Configuration Wizard is capable of determining the correct settings.
7. On COM Port Options, the settings must match the COM port behavior expected by the PC
application. The Configuration Wizard will recommend such settings.
Fig. 68. Configuration Wizard from Serial/IP