User`s manual

User manual Version 1.0

ABLELink

SW5001 Wireless Serial Server

Fig. 66. Enable Virtual COM mode by Telnet

Running Serial/IP for program on monitoring PC

On Window Start Menu, go to\program\Serial/IP for \Control panel\ select port \then select the serial port.

Then the “Serial/IP for Control Panel” window appear. :

Fig. 67. Detail setting from Serial/IP

On the right of the panel is a sample for COM 4 settings. On the left is the list of the COM ports that have

been selected (on Select Ports window) for use by the Virtual COM Redirector. Change the list by

clicking the Select Ports button.

Each COM port has its own settings. When click on a COM port, the Control Panel changes to reflect

that the selected port.

Note: COM port changes become effective immediately.

Configuring Virtual COM Ports

Serial/IP COM port can be changed as follows:

1. Select a COM port on the list.

2. On IP Address of Server, enter serial server IP address.

3. On Port Number, enter the TCP port number of the serial server.

4. On Server Credentials, the default is No Login Required. If the serial server does require login