User`s manual

User manual Version 1.0

ABLELink

SW5001 Wireless Serial Server

User can select them from a list of COM ports, which is from COM1 up to COM256.

Installation

Make sure you have turned off all anti-virus software before beginning the installation. Run Vcom.exe

program included in the CD to install Virtual COM for your operating system.

In the end of the installation, please select one or two COM ports to become the Virtual COM ports.

Uninstalling

From Windows Start menu select Setting\ Control Panel\ Add/Remove Programs.

Select Serial IP for in the list of installed software.

Click the Add/Remove button to remove the program, or From Windows Start menu select Programs,

Serial IP for , Uninstall Serial IP for to remove the program.

A.3 Virtual COM communication

Enabling Virtual COM on SW

From web browser access to SW by typing its IP address, click on “Serial” link to access Serial page, on

the top half of the page click on “TCP Server” and enable Virtual COM by putting a check in front of the

“Enable” button, then type in the local port number in the “Local Port” field as indicated in the following

screen:

Fig. 63. Enable Virtual COM Mode by Web page

One may also enable Virtual COM through telnet by setting Serial as a TCP server, and enter the local

port number for Serial, then enable virtual COM as shown in the following procedure: