User`s manual

User manual Version 1.0
ABLELink
SW5001 Wireless Serial Server
40
4.4.11. Changing password from System settings
Operation: System->Security
Click on the “Security” link and the following screen shall appear
Enter the old password on “Old Password” field; enter the new password on “New Password” and the
“Verified Password” fields, and then click on “Save Configuration” to update the password.
Fig. 59. Change password from System Security Page
Tip: One may press the reset key on product to reset password to the default value
4.4.12. Restoring factory default
Operation: System Set to Default
One may click on “set to default and restart” button to restore SW’s settings to factory default..
Fig. 60. Set all parameters to default by web
4.4.13. Restart system
Operation: System Restart
The changes of networking parameters will take effect only after the SW is exited and restarted.
Fig. 61. Restart system by Web