User`s manual

User manual Version 1.0

ABLELink

SW5001 Wireless Serial Server

4.4.7. Configuring Serial setting

This filed can configure serial parameters for SW. Here one may configure Serial parameters, include

UART Mode, baud rate, parity, data bit and type of flow control you wanted

Configuring UART Mode: RS-232 or RS-485 or RS-422

Baud rate: 1200/2400/4800/9600/19200/38400/57600/115200

Parity: None or Odd or Even or Mark or Space

Data bits: 7 or

Stop bits: 1 or 2

Flow control: None or Xon/Xoff or Hardware(RTS/CTS)

Fig. 56. COM settings from Serial Web Page

4.4.8. Configuring packet delimiter

Packet delimiter is a way of controlling the number of packets in a serial communication. It is designed to

keep packets in track. SW provides two ways in parameter setting: (1) Packet delimiter timer and (2)

Character patter terminator. By default, packet delimiter timer is 10 ms. the range of packet delimiter timer

is 10 to 30,000 msec, if “character patter is selected, for a data stream ended with “0x0a04”, then the

entire data buffer of the serial device is transmitted.

One may also choose character pattern as the packet delimiter indicated.