User`s manual

User manual Version 1.0
ABLELink
SW5001 Wireless Serial Server
32
Fig. 48. Wireless information by Web page
There are 3 buttons can be operated
1. Rescan: Click on the “Rescan” button
 SW shall start site-survey procedures, then on the site-survey list will display the access point found.
2. Select: On the site-survey list, click on radio button to attach the access point you wanted
3. User defined: One may also define user information for wireless parameters by the user
One may configure wireless LAN parameters through web pages, the following wireless settings page
shall appear. (For example, SW is attached to an access point; it also allows you to configure SW’s
wireless topology, SSID, WEP, or WPA-PSK security) In addition, the BSS Quality and Signal Strength is
indicated you the state of signal.
4.4. Wireless detail settings from pop-up page
It will be shown that pop-up windows page for advantece witeless settings if “select” or “user define”
button was clicked. Those fields include roaming threshold, other wireless settings, and so on. It is signal
threshold for the SW roaming among more wireless AP. SW will change to other AP with stronger wireless
signal if the orignial AP’s signal less than roaming threshold.