User`s manual

User manual Version 1.0
ABLELink
SW5001 Wireless Serial Server
31
Fig. 45. WLAN Setting from Network web page
Tip: The Network setting will be active after the device was restart.
4.3.6. Configuring DNS Settings
Operation: [Network] [DNS Settings]
Click on the Network link and the following screen shall appear. Fill in DNS information on third field.
Alternatively, one may configure by checking on Obtain an IP automatically” field to obtain IP address,
gateway subnet mask and DNS server IP address from DHCP server automatically.
Fig. 46. DNS Setting from Network web page
4.3.7. Configuring SNMP settings
Operation: [Network] [SNMP Settings]
Click on the “Network” link and the following screen shall appear.
Check on “ Enabling Settings” field. Fill in SysNameSysLocationSysContact information on SNMP
Settings fields. The changes of SNMP Settings will take effect only after the SW 5001 is exited and
restarted.
Fig. 47. SNMP Setting from Network web page
4.3.8. Wireless Configuration from Wireless Page
There are 4 items allowed to change on Wireless configuring page in which include Default, Current and
Site-Survey Information. Click on “Wireless” link and the following screen shall appear.