User`s manual

User manual Version 1.0

ABLELink

SW5001 Wireless Serial Server

4.3.3. Network setting from Network page

There are 4 items allowed to change on Network page in which include LAN, WLAN, DNS and SNMP

Information.

Fig. 43. Network information by Web page

4.3.4. Configuring LAN settings

Operation: [Network]  [LAN Setting]

Click on the “Network” link and the following screen shall appear. Fill in IP information on TCP/IP field.

Alternatively, click on DHCP to obtain auto IP address, gateway and subnet mask information.

Fig. 44. LAN Setting from Network web page

Tip: The Network setting will be active after the device was restart.

4.3.5. Configuring WLAN settings

Operation: [Network]  [WLAN Settings]

Click on the “Network” link Mode and the following screen shall appear. Fill in WLAN IP information on

WLAN settings fields. Alternatively, one may activate DHCP client function by checking on “Obtain an IP

automatically” field to obtain IP address, gateway and subnet mask from DHCP server automatically.