User`s manual

User manual Version 1.0
ABLELink
SW5001 Wireless Serial Server
28
4.3. Configuring using web browser
1. Make sure the PC is on the same subnet as SW
2. Open a web browser, and then enter the same IP address as the SW. The default user name is
admin and the default password is null (leave it blank).
3. The SW’s network, link mode and COM ports settings can be configured on different web pages.
4. Click “Save Configuration” to save settings.
5. Click ”Restart” button to initiate the change.
To modify settings through the web server interface, follow the steps below.
4.3.1. Login to System by web
1. While on the web browser, ex. Microsoft IE or Firefox and son on, enter the IP address of SW on the
URL. Example: http://10.0.50.100
2. The following authentication screen shall appear. Enter desired user name and password then click
on “OK”. The default user name is admin and password is null (leave it blank).
3. The following overview screen shall appear.
Fig. 38. Authorization request for system security
4.3.2. General Infoamtion by Overview Page
This system overview window gives the general information on Device, Network, and Serial information
(see Fig. 39).
Fig. 39. Overview for system information by Web