User`s manual

User manual Version 1.0

ABLELink

SW5001 Wireless Serial Server

Fig. 21. TCP Client mode in link mode

4.2.6. Configuring Link Mode- UDP mode

Operation: [Main]  [4 Serial Settings]  [1 Link mode]  [3 UDP]

SW can be configured in a UDP mode to establish connection using uni-cast or broadcast data from the

serial device to one or multiple host computers. Vice versa is also true. For example, The original RS-422/

RS485 bus is transferred and extended connecting distance by serial servers, The destination IP is

assigned by single IP or group IPs, The configuration is limited by the Local Listening Port (For example,

on the SW listening port is 4660 which receive data sending from the host computer)

SW can support up to 4-group IPs for UDP connection, if users needed.

Fig. 22. UDP mode in link mode

Note: UDP mode doesn’t support Virtual COM mode yet.

4.2.7. Configuring Serial for COM port

Operation: