User`s manual

User manual Version 1.0
ABLELink
SW5001 Wireless Serial Server
12
Fig. 13. Overview information by telnet
Notes:
1. If the SW does not receive any command within 1 minute, Telnet will be terminated
automatically.
2. The changes of networking parameters will take effect only after the SW is exit and restarted.
3. Select “1” from “Input choice and enter (0~5):” to enter “overview”
4.2.1. General infoamtion from Overview
Location: [Main][1 Overview]
This system overview window gives the general information on Ethernet & WLAN IP, MAC address,
SNMP information, kernel and AP version, and the connection status of the device.
The following overview information shall appear.
Device Information:
Model Name: SW
Device Name: [Allows for changes in SNMP settings]
Kernel Version: [Read Only, Generated by system]
AP Version: [Read Only, Generated by system]
Current Time: Allows for changes in Time Server Settings to obtain current time automatically]
Ethernet Information:
MAC: [Read Only]