User`s manual

User manual Version 1.0
ABLELink
SW5001 Wireless Serial Server
8
3. Hardware Description and settings
3.1. Packaging
 SW device x 1
 Mini DIN to RS-232 DB 9 connector cable x 1
 Wall-mounting kit x 2
 Wireless Serial Server Quick Start Guide x 1
 Product CD containing configuration utility and other tools
3.2. Interfaces
Figure 2.1 the SW interfaces are shown.
10/100M
Ethernet port for
settings
Mini-DIN Connector
for Serial port
5-pin Terminal
Block for Serial
port
3-pin Terminal
Block for Power
input
SMA rev. Antenna
Connector
LED indication
for Wireless
Status
LED indication
for System
Status
Fig. 9. SW Interfaces
3.3. MODE Switch
The default setting is RS-232 mode. Software configurations can be changed from the default settings to
user’s desired mode by web browser or telnet tools. To modify the configurations, use the web browser,
Telnet or monitor.exe configuration utilities.