User`s manual

User manual Version 1.0
ABLELink
SW5001 Wireless Serial Server
4
Fig. 3. SW as TCP Server in Virtual COM Mode
Configuring SW series to TCP client
One can configure SW to a TCP Client; for example, the destination IP is 10.0.0.100 and the destination
port is 1000, and the IP filter is disabled (by default).
Fig. 4. SW as TCP Client in Virtual COM Mode
2.2.2. Tunneling Mode
Tunneling Mode is used for multiple serial devices to “talk” among one another through SW’s through
wireless LAN (or Ethernet). This mode is particularly useful when two or more serial devices are far away.