User manual

User manual Version 1.1

ABLELink

Serial-Ethernet Server

GW51W-

MAXI

Appendix C. Hardware Configuration

Disable System Firmware

The AP (application program) firmware of GW51W-

MAXI

can be disabled. This function is used in the

situation that you downloaded a wrong version of firmware that caused the system crashed.

To disable the current version of firmware and prevent it from executing, please do the followings:

1. Turn the power off, open the case of GW51W-

MAXI

2. Short the Jumper JP7 and JP8 on the right-top corner from the main board to disable AP

firmware.

3. Power on GW51W-

MAXI

4. Download the correct AP firmware to GW51W-

MAXI

5. Remove the Jumper JP7 and JP8 to enable AP firmware.

6. Close the case and continue your operations.

59 / 63