User manual

User manual Version 1.1

ABLELink

Serial-Ethernet Server

GW51W-

MAXI

Run-time

When run-time, if the default key is pressed and then released, one of the specified actions will be down

depending on the released time after you heard how many beeps.

State 1. When run-time, if the key is pressed, there is 1 clear beep and then silence.

If key is released here, system will restart.

State 2. After state 1 for 3 seconds, there are 2 clear beeps.

System will restore default configuration and then restart.

State 3. After state 2 for 30 seconds, there are 3 clear beeps.

The action is the same as State 3 in startup time.

State 4. After State 3 for 3 seconds, there are 4 clear beeps.

The action is the same as State 4 in startup time.

State 5. After 4 for 3 seconds, there are 5 clear beeps.

The action is the same as State 5 in startup time.

State 6. After state 5 for 3 seconds, there is 1 clear beep.

The action is the same as State 6 in startup time.

BSS quality is indicated by count of beeps, which is shown as bellowed:

1 beep There is no signal detected

2 beeps The quality is between is 0%~20%

3 beeps The quality is between is 20%~40%

4 beeps The quality is between is 40%~60%

5 beeps The quality is between is 60%~80%

6 beeps The quality is between is 80%~100%

A.5 LED indicator

LAN LED

Message

Description

LED Off

No data is transmitting on Ethernet

LED blinking

Data is transmitting on Ethernet

Table 2. LAN LED Message

COM Port LED

Message Description

LED off

No data is transmitting on COM port

54 / 63