User manual

User manual Version 1.1

ABLELink

Serial-Ethernet Server

GW51W-

MAXI

field, type the new password in the “Please input new password” and the “Please verify new

password” fields.

Note: You can press the default key of product to reset password to the default value.

COM1 Setup

Select “4” from “Input choice and enter (0~5):” the following screen appears

The page gives you an opportunity to configure parameters of COM1 setting which includes COM1

working mode, port parameters, enabling or disabling serial buffer’s data and setting packet delimiter.

LINK1 Setup

Type 1 from “Input choice and enter (1~4):” of COM1, the following screen appears. Configure

GW51W-

MAXI

as TCP server and the local port is 4660. IP filter is disabled by default, if IP filter is enabled,

only source IP 10.0.0.154 can connect to GW51W-

MAXI

Note: IP filtering function is disabled if setting FILTER_IP to “0.0.0.0”.

15 / 63