User manual

User manual Version 1.1

ABLELink

Serial-Ethernet Server

GW51W-

MAXI

GW51W-

MAXI

reboots it will change its IP address to the new one.

Note:

1. Arp command can only be used to set a static IP address of GW51W-

MAXI

using system reset user

name admin and default password null.

2. Only TCP/IP packet with destination port number 1 will lead GW51W-

MAXI

to reboot and change the

IP address.

3.3 Auto IP

A DHCP server automatically assigns the IP address and network settings. GW51W-

MAXI

supports

DHCP. It will supply for the unit with an IP address gateway address, and subnet mask. You may use

Monitor.exe software to search network information automatically by putting a check on Auto IP on

Dialog window.

10 / 63