User`s manual

Quick Start Guide Version 1.2
GW51C-MAXI Serial Server
1
This document is intended to provide customers with brief descriptions on the product and to assist
customers to get started. For detail information and operations of the product, please refer to the user’s
manual in the product CD.
1. Packaging
 GW51C-MAXI Serial Server
 Warranty Booklet
 Quick Start Guide
 Product CD
 Mini DIN to RS-232 DB-9 Cable
Optional Accessories：
 Power Adapter with Terminal block output 12V1.25A
(1) US315-12 (US) Switching adapter
(2) US315-12 (EU) Switching adapter
UL Notice for Power supplier
All the series of GW products are intended to be supplied by a Listed Power Unit marked with “LPS”, “Limited
Power Source” or “Class 2” and output rate 9~30VDC, 0.3A minimum. Or, use the recommended power
supply in “Optional Accessories”.
2. Hardware Description
2.1. Interfaces
Fig.1 shows the interfaces of Serial Server’s Connectors、LEDs & the factory switch settings.
Mode Switch
Table
LED
Indicator
Mode Switch
Serial Port
Terminal Block
Connector
Power Supply Input
Connector
Mini-Din Pin
Assignment
UTP
Connector
Serial Port Mini DIN
Connector
Fig 1. Front Plate of GW51C-MAXI Serial Server
Note: One can press the reset button for 3 second to reset the settings to default value
2.2. LED Indications
2.2.1. LAN LED Message
Message Description
LED Off
No data is transmitting on Ethernet
LED blinking
Data is transmitting on Ethernet
2.2.2. COM Port LED Message
Message Description
LED off
No data is transmitting on COM port
LED on blinking state
Data is transmitting on COM port
2.2.3. RUN LED Message
Message Description