User manual

User manual Version 1.1
ABLELink
® Ethernet-Serial Server GW51C-
MAXI
2. Nomenclature and Settings
2.1 Nomenclature of GW51C-
MAXI
Components
Figure 2.1 shows the names of GW51C-
MAXI
components. In the figure, the indicated switch settings
represent factory settings.
Mode Switch
Table
LED
Indicator
Mode Switch
Serial Port
Terminal Block
Connector
Power Su
pp
l
y
In
pu
Connector
Mini-Din Pin
Assignment
UTP
Connector
Serial Port Mini
D
Connector
Figure 2.1. Nomenclature of GW51C-
MAXI
components.
2.2 MODE Switch
This sets or initializes the operating mode for the GW51C-
MAXI
. The factory default setting is that Switch 1
(SW1) and Switch 2 (SW2) are set to OFF. You can use the Mode switch to change the operating mode
from the factory default settings to your desired mode.
GW51C-
MAXI
can be setup either RS-232, RS-485, RS-422 or Console configuration mode by MODE
Switch.
SW1 SW2 Mode
OFF RS-232 OFF
ON CONSOLE
OFF RS-485 ON
ON RS-422
Copyright © 2004 Atop Technologies, Inc.
All rights reserved. Designed in Taiwan.
8 / 54