User manual

User manual Version 1.1
ABLELink
® Ethernet-Serial Server GW51C-
MAXI
You can choose either 568A or 568B definition. If you want to make a crossover cable, you should use
568A and 568B definition respectively in each terminal of a UTP cable.
A.3.3 Power terminal block connector
A.4 Buzzer/LED Message
A.4.1 Buzzer
“ ^ “: Beep twice
“ = “: Beep off
Message Description
^===^===^===^===^===^===^...
(1sec)
Watchdog problem, return service is required
^^^^^^^^^^^^^^^^^^^^^^^... Memory problem, return service is required
^==^========^^
(5sec)
Startup OK but AP firmware is disabled
^==^========^^^
(5sec)
Startup OK and AP firmware is enabled
Table 1. Buzzer Message
A.4.2 LAN LED
Message Description
LED Off
No data is transmitting on Ethernet
LED blinking
Data is transmitting on Ethernet
Table 2. LAN LED Message
Copyright © 2004 Atop Technologies, Inc.
All rights reserved. Designed in Taiwan.
46 / 54