User manual

User manual Version 1.1

ABLELink

Ethernet-Serial Server GW51C-

MAXI

and/or password every time an application tries to use the serial server.

5. Click the Configuration Wizard button and then click the Start button that appears in the wizard

window. This important step verifies that the Virtual COM Redirector can communicate with the

serial server using the settings you have provided. If the Log display does not show errors, click

the Use Settings button in the wizard, which makes the recommended settings effective and

returns you to the Control Panel to continue with the following steps.

6. For Connection Protocol, the setting must match the TCP/IP protocol that the serial server

supports. The Configuration Wizard is usually able to determine the correct setting.

7. For COM Port Options, the settings must match the COM port behavior expected by the PC

application that will use this COM port. The Configuration Wizard will recommend a combination

of settings.

34 / 54