User manual

User manual Version 1.1
ABLELink
® Ethernet-Serial Server GW51C-
MAXI
LINK1 Setup
1. Click on the “COM1” link and the following screen appears, you can configure GW51C-
MAXI
as
transparent mode by default. Configure GW51C-
MAXI
as TCP server and the local port is 4660, IP filter
is disabled by default, if IP filter is enabled, only source IP 10.0.29.11 can connect to GW51C-
MAXI
.
Configure GW51C-
MAXI
as TCP client, the destination IP is 10.0.29.11, destination port is 4660.
Pair Connection
In the case of the serial connection is established with two or more GW51C-
MAXI
to send data over
Ethernet network, i.e. pair connection mode, you can choose “pair connection” which is indicated in the
following figure to cope with any type of serial device.
Copyright © 2004 Atop Technologies, Inc.
All rights reserved. Designed in Taiwan.
27 / 54