User manual

User manual Version 1.1
ABLELink
® Ethernet-Serial Server GW51C-
MAXI
same.
6. Once Hyper Terminal is connected, type in username and password then the following Hyper Terminal
window appears,
7. The following configuration operations are totally the same as those by Telnet.
8. After finishing console settings, power off GW51C-
MAXI
, put SW1 and SW2 back to the previous
setting.
4.4 Configuration set by web browser
It is also possible to modify various settings through the web server interface. To do so, please follow the
steps below.
Log in to the system
1. From web browser, type in the IP address of GW51C-
MAXI
in the URL.
Example: http://10.0.50.100
2. The following authentication screen appears. Please type in user name and password then click on
OK. The user name is admin and password is null by default.
Copyright © 2004 Atop Technologies, Inc.
All rights reserved. Designed in Taiwan.
23 / 54