User manual

User manual Version 1.1

ABLELink

Ethernet-Serial Server GW51C-

MAXI

4.3 Configuration set by Hyper Terminal console utility

1. Power off GW51C-

MAXI

2. Set the MODE switch SW1 to ‘OFF’ and SW2 to ‘ON’.

3. Use a PC to connect to GW51C-

MAXI

’s console with RS-232 cross over cable.

4. Power on GW51C-

MAXI

5. Open a Hyper Terminal program from your computer Start menu -> Programs -> Accessories ->

Communication -> Hyper Terminal, set COM2 parameters as follows.

- Baud rate: 9600 bps

- Data bit: 8 bits

- Parity: None

- Stop bit: 1bit

- Flow control: None

Note:

At present time baud rate is fixed at 9600, 8, n, 1, without flow control for console port

communication, RS-232C parameters of your computer COM port and GW51C-

MAXI

must be the

22 / 54