User manual

User manual Version 1.1

ABLELink

Ethernet-Serial Server GW51C-

MAXI

Note: You can press the default key of product to reset password to the default value.

COM1 Setup

Select “4” from “Input choice and enter (0~4):” the following screen appears:

The page gives you the opportunity to configure parameters of COM1 setting which include COM1

working mode, port parameters, enabling or disabling serial buffer’s data and setting packet delimiter.

LINK1 Setup

Type 1 from “Input choice and enter (1~4):” of COM1, the following screen appears. Configure

GW51C-

MAXI

as TCP server and the local port is 4660. IP filter is disabled by default, if IP filter is enabled,

only source IP 10.0.0.154 can connect to GW51C-

MAXI

Note: IP filtering function is disabled if setting FILTER_IP to “0.0.0.0”.

15 / 54