User manual

User manual Version 1.1

ABLELink

Ethernet-Serial Server GW51C-

MAXI

NOTE:

1. If GW51C-

MAXI

does not receive any command within 1 minute, Telnet will be terminated

automatically.

2. The changes of networking parameters will take effect only when you exit and restart GW51C-

MAXI

3. Select “1” from “Input choice and enter (0~4):” to enter overview page as following:

This page gives you the general information of GW51C-

MAXI

including IP and MAC address, SNMP

information, kernel and AP version, and connection status of the device.

Networking

Select “2” from “Input choice and enter (0~4):” to enter Networking page as following:

13 / 54