User manual

User manual Version 1.1

ABLELink

Ethernet-Serial Server GW51C-

MAXI

4. Software Configuration

4.1 Configuration set by monitor.exe utility

Use monitor.exe that comes with the product CD or diskette to configure the network parameters of

GW51C-

MAXI

. As you can see from the following picture, you can change IP address, gateway IP address,

subnet mask, user ID and password of GW51C-

MAXI

from the utility. For more details of the utility please

refer to Appendix-D Configuration Utility.

4.2 Configuration set by Telnet utility

You can use Telnet utility to change configuration settings of GW51C-

MAXI

. To do so, please do the

following.

Telnet to 51C-

MAXI

using command “Telnet IP_address”.

For example Telnet 10.0.50.100

1. After telnet to GW51C-

MAXI

, system prompts for a password, the default password is null.

Note: You can press the default button of GW51C-

MAXI

to reset the password to the default value.

2. After verifying the password, the following terminal screen appears.

12 / 54