User manual

User manual Version 1.1

ABLELink

Ethernet-Serial Server GW51C-

MAXI

rear panel, then use Telnet to send the TCP/IP packet with destination port number 1 to GW51C-

MAXI

, after

GW51C-

MAXI

reboots it will change its IP address to the new one.

Notes:

1. Arp command can only be used to set a static IP address of GW51C-

MAXI

using system default user

name admin and default password null.

2. Only TCP/IP packet with destination port number 1 will lead GW51C-

MAXI

to reboot and change the IP

address.

3.3 Auto IP

A DHCP server automatically assigns the IP address and network settings. GW51C-

MAXI

supports DHCP. It

will supply for the unit with an IP address gateway address, and subnet mask. You may use Monitor.exe

software to search network information automatically by putting a check on Auto IP on Dialog window.

10 / 54