User manual

User manual Version 2.3

ABLELink

Serial-Ethernet Server

GW21W

This page allows you to change network settings of the device including IP address, subnet mask,

gateway IP address and SNMP information of GW21W. Please notice that any setting change made on

this page will not take effect until you restart the device.

Change the password

1. Select “3” from “Input choice and enter (0~6):” the following screen appears.

2. If you want to change the password, please type the old password in the “Please input old password”

field, type the new password in the “Please input new password” and the “Please verify new

password” fields.

Note: You can press the reset key of product to reset password to the default value.

12/52