User manual User guide
Table Of Contents
- 1 Preface
- 2 Introduction
- 3 Getting Started
- 4 LCM Configuration
- 5 Web Configuration
- 6 CLI Configuration
- 7 Link Modes and Applications
- 7.1 Link Mode Configuration
- 7.2 Link Mode Applications
- 7.2.1 TCP Server Application: Enable Virtual COM
- 7.2.2 TCP Server Application: Enable RFC 2217
- 7.2.3 TCP Client Application: Enable Virtual COM
- 7.2.4 TCP Client Application: Enable RFC 2217
- 7.2.5 TCP Server Application: Configure SE5416A Series as a Pair Connection Master
- 7.2.6 TCP Client Application: Configure SE5416A Series as a Pair Connection Slave
- 7.2.7 TCP Server Application: Enable Reverse Telnet
- 7.2.8 UDP Application: Multi-Point Pair Connection
- 7.2.9 TCP Server Application: Multiple TCP Connections
- 7.2.10 TCP Server Application: Multi-Point TCP Pair Connections
- 8 VCOM Installation & Troubleshooting
- 9 Specifications
- 10 Upgrade System Firmware
- 11 Warranty

Atop Industrial Serial Device Server
SE5408A/SE5416A Series
User Manual V 1.0
iv
5.4.2 COM Configuration: Advanced Settings ........................................................ 37
5.5 Alert Settings .......................................................................................................... 40
5.5.1 Email Settings ................................................................................................ 40
5.5.2 Alert Event ..................................................................................................... 41
5.6 System Configuration ............................................................................................ 42
5.6.1 Link State ....................................................................................................... 42
5.6.2 Log Settings ................................................................................................... 43
5.6.3 System Log .................................................................................................... 45
5.6.4 COM Log ........................................................................................................ 45
5.6.5 Time Settings ................................................................................................. 46
5.6.6 Security Configuration .................................................................................... 47
5.6.7 Import/Export ................................................................................................. 48
5.6.8 Set to Default ................................................................................................. 49
5.6.9 Restart............................................................................................................ 49
6 CLI Configuration .................................................................................. 50
6.1 Accessing the CLI .................................................................................................. 50
6.1.1 Serial Console ................................................................................................ 50
6.1.2 Telnet Console ............................................................................................... 50
6.2 General Information ............................................................................................... 51
6.3 Networking Configuration ..................................................................................... 59
6.3.1 LAN 1 / LAN 2 Settings .................................................................................. 59
6.3.2 DNS Settings ................................................................................................. 60
6.3.3 SNMP Settings ............................................................................................... 60
6.3.4 Bridge Settings ............................................................................................... 61
6.3.5 ERPS Settings ............................................................................................... 61
6.3.6 STP Settings .................................................................................................. 63
6.4 COM Port Configuration ........................................................................................ 64
6.4.1 TCP Server for Link Mode ............................................................................. 64
6.4.2 TCP Client for Link Mode ............................................................................... 64
6.4.3 UDP Link Mode .............................................................................................. 65










