User's Manual

User manual Version 1.0
ABLELink Serial-Ethernet Server
GW51W-MAXI
Copyright © 2003 Atop Technologies, Inc.
All rights reserved. Designed in Taiwan.
31 / 54
Uninstalling
1. From Windows Start menu select Setting, Control Panel, Add/Remove Programs.
2. Select Serial IP for ATOP in the list of installed software.
3. Click the Add/Remove button to remove the program, or From Windows Start menu select
Programs, Serial IP for ATOP, Uninstall Serial IP for ATOP to remove the program.
4.5.2 Virtual COM communication
4.5.2.1 Enable Virtual COM on GW51W-MAXI
From web browser access to GW51W-MAXI by typing its IP address, click on COM1 link to access
COM1 page, on the top half of the page click on “TCP Server” and enable Virtual COM by putting a
check in front of the “Enable” button, then type in the local port number in the “Local Port” field as
indicated in the following figure:
or you can enable Virtual COM through telnet configuration by setting COM1 as TCP server, and
type in the local port number for COM1, then enable virtual COM as shown in the following figure: