User's Manual

User manual Version 1.0
ABLELink Serial-Ethernet Server
GW51W-MAXI
Copyright © 2003 Atop Technologies, Inc.
All rights reserved. Designed in Taiwan.
14 / 54
COM1 Setup
Select “4” from “Input choice and enter (0~5):” the following screen appears
The page gives you an opportunity to configure parameters of COM1 setting which includes COM1
working mode, port parameters, enabling or disabling serial buffer’s data and setting packet delimiter.
LINK1 Setup
Type 1 from “Input choice and enter (1~4):” of COM1, the following screen appears. Configure
GW51W-MAXI as TCP server and the local port is 4660. IP filter is disabled by default, if IP filter is
enabled, only source IP 10.0.0.154 can connect to GW51W-MAXI.
Note: IP filtering function is disabled if setting FILTER_IP to “0.0.0.0”.
Configure GW51W-MAXI as TCP client, the destination IP is 10.0.29.123, destination port is 666.